|
| |
|
|
| |
Thermal Dispersion /
Paddle Type Level Switch
Thermal dispersion flow switch is a precise flow
sensing device, which uses heat diffusion principle.
The probe consists of two temperature sensors.
One sensor measures the temperature of the fluid
where the probe is immersed. The other sensor is
heated at a constant power. This creates a temperature difference between the
two sensors. Temperature difference is inversely
proportional to the flow velocity. The probe and
housing are made by stainless steel or engineering
plastic. Since the device has no moving parts,
therefore there is no wear and tear problem. |
|
|
|
|
| |
|
|
|
| |
| |
|
|
| |
Battery Operated Turbine Flow Meter
The flowing media engages a vaned rotor causing it to rotate at an angular velocity proportional to flow rate. The pick-up coil senses the spinning motion of the rotor inserted in the pipe & converts it into a pulsating electrical signal. Summation of the pulsating electrical signal is directly related to the total flow. The frequency is linearly proportional to flow rate which is converted to mA signal by electronic circuitry. |
|
|
|
|
| |
|
|
|
| |
| |
|
|
| |
FleetLog Vehicle Efficiency Monitoring System
FleetLog is Fluidynes unique innovation for measuring and improving
vehicle Efficiency ( Mileage ). Apart from enlightening the Fleet owner
on the actual consumption of diesel and the correct distance travelled
to curb pilferage of diesel, the system analyses the drivers driving habit
which affects the mileage and monitors overspeeding to promote safe
driving. The system focuses on training the driver to drive efficiently
and safely to achieve the best possible mileage.
Application Data Request For Quotation |
|
|
|
|
| |
|
|
|
| |
| |
|
|
| |
Flow Indicator Totalsier FL 600 LCD Type
Electronet's FL - 600 series of Flow Indicator is used to monitor
corrected flow with the help of Pressure & Temperature Compensation.
Flow rate is processed linearly or Square rooted according to
requirement.10point linearisation is available in case of nonlinear
input. Flow rate is indicated on 4 digit & Totalised flow is indicated on 8
digit display. Three modes of operation i.e. normal, batch & monthly are
provided The built in battery back up is provided for the memory to
avoid loss of data in case of power failure. Microcontroller based
design with full flexilibility is provided for flow metering
applications .optional high/low relays are available on request. |
|
|
|
|
| |
|
|
|
| |
| |
|
|
| |
Fuel Consumption Monitor 6622 Series
The Fuel Consumption Monitor is compact fuel flow
measuring system suitable for monitoring the net fuel
consumption of stationary equipment like engines,
gensets, pumpsets, compressors etc. after accounting for
the return fuel from the engine. The unit is provided with a
self powered Flow Indicator which ensures accuracy with a
variety of fuels under all operating conditions.
Application Data Request For Quotation |
|
|
|
|
| |
|
|
|
| |
| |
|
|
| |
Turbine Flow Transmitter FL 102
The flowing media engages a vaned rotor causing it to rotate at an
angular velocity proportional to flow rate. The pick-up coil senses the
spinning motion of the rotor inside the pipe & converts it into a
pulsating electrical signal. Summation of the pulsating electrical signal
is directly related to the total flow. The frequency is linearly
proportional to flow rate which is converted to mA signal by
electronic circuitry. |
|
|
|
|
| |
|
|
|
| |
|
| |
