| |
|
| |
| |
|
|
| |
EchoPod
DL10 Ultrasonic Level Transmitter
Flowline introduces the DL10 EchoPod, an innovative
level sensor that replaces floats, conductance and pressure
sensors that fail due to dirty, sticking and scaling
media in small tanks 49.2” (1.25 m) or less. EchoPod,
a general purpose sensor, provides non-contact level
measurement transmitter. Maintenance free, EchoPod
is unaffected by the media it measures. Additionally,
EchoPod is well suited for corrosive and dirty applications
with its non-metallic housing and transducer.
EchoPod provides a total solution for fluid handling
and automation. The time to “Think Small and Win
Big” is now, and it’s with EchoPod. |
|
|
|
|
| |
|
|
|
| |
| |
|
|
| |
EchoPod
2.5m Ultrasonic Level Switch, Controller and Transmitter
The general purpose, ultrasonic sensor provides
non-contact level detection up to 98.4” (2.5m)
with 4 SPST 60 VA 1A relays and a two-wire 4-20
mA level measurement output. Each relay can be
configured on a single set point alarm or latched
on two sets for automatic fill or empty in simplex
or duplex control modes with fail-safe logic. The
embedded controller can replace external control
hardware. The sensor is well suited for a wide
range of corrosive, sticky or dirty type media.
EchoPod is broadly selected for day tanks, sumps,
IBC totes, lift stations and mini-bulk storage applications.
To configure EchoPod, download our
free WebCal software and purchase one USB interface
tool. |
|
|
|
|
| |
|
|
|
| |
| |
|
|
| |
EchoPod
DS14 Ultrasonic Level Switch and Controller
Flowline introduces the DS14 EchoPod, an innovative
level sensor that replaces floats, conductance and pressure
sensors that fail due to dirty, sticking and scaling
media in small tanks 49.2” (1.25 m) or less. EchoPod,
a general purpose sensor, provides non-contact switch
and control capabilities in one package. Maintenance
free, EchoPod reduces tank system hardware through
simplicity and consolidation. Additionally, EchoPod
is well suited for corrosive and dirty applications with
its non-metallic housing and transducer. EchoPod provides
a total solution for fluid handling and automation.
The time to “Think Small and Win Big” is now,
and it’s with EchoPod.
|
|
|
|
|
| |
|
|
|
| |
| |
|
|
| |
EchoPod
DX10 Ultrasonic Level Frequency Transmitter
Flowline introduces the DX10 EchoPod, an innovative
level sensor that replaces floats, conductance and pressure
sensors that fail due to dirty, sticking and scaling
media in small tanks 49.2” (1.25 m) or less. EchoPod,
a general purpose sensor, provides non-contact level
measurement through frequency or voltage. Maintenance
free, EchoPod reduces tank system hardware
through simplicity and consolidation. Additionally,
EchoPod is well suited for corrosive and dirty applications
with its non-metallic housing and transducer.
EchoPod provides a total solution for fluid handling
and automation. The time to “Think Small and Win
Big” is now, and it’s with EchoPod.
|
|
|
|
|
| |
|
|
|
| |
| |
|
|
| |
Switch-Tek Ultrasonic Level Switch
CSA and Cenelec approved intrinsically safe use in general purpose or hazardous
applications, the ultrasonic level switch is broadly applied in chemical,
waste, hydrocarbon and petroleum based liquids. Media examples include
sulfuric acid, diesel fuel and wastewater. The sensor is universally mounted
through the wall or inside the tank, and is com patible with the MicroPoint
indicator.. |
|
|
|
|
| |
|
|
|
| |
| |
|
|
| |
Echotouch Ultrasonic Level Transmitter
Offered in CSA and Cenelec approved intrinsically safe or general purpose
configurations, the two-wire ultrasonic transmitter provides noncontact
level measurement up to 18’ or 5.4m, and is ideally suited for
challenging corrosive, slurry or waste liquids. The transmitter is typically
selected for atmospheric bulk storage, day tank and waste sump
applications located within a classified hazardous area. Media examples
include diesel fuel and hydrochloric acid. The transmitter is calibrated
in less than a minute using the LCD display, 4-button interface
and intuitive calibration menu. All user set points are held in nonvolatile
memory. In the event of acoustic signal loss, the transmitter will
hold the current output at the user designated safe state.
|
|
|
|
|
| |
|
|
|
| |
| |
|
|
| |
EchoSonic II Ultrasonic Level Transmitter
The general purpose two-wire ultrasonic
transmitter provides non-contact
level measurement up to 32.8’ (10 m), and is well suited for challenging ultrapure,
corrosive, slurry or waste liquids.
The transmitter is broadly selected for
atmospheric bulk storage, day tank,
waste sump, process vessel, IBC tote,
55-gallon drum and waste sump applications.
Media examples include acetic
acid and resin.
|
|
|
|
|
| |
|
|
|
| |
| |
|
|
| |
Echotouch Ultrasonic Level Transmitter
The general purpose three-wire ultrasonic transmitter provides noncontact
level measurement up to 40’ or 12.2m with an internal relay that
can be configured as a single-point alarm or latched on two points for
automatic fill or empty control. The transmitter is ideally suited for
challenging corrosive, slurry or waste liquids and is typically selected
for large atmospheric bulk storage and waste sump applications.
Media examples include sulfuric acid and resin. For applications with
heavy agitation, surface foam or restricted measurement space, install
the ultrasonic transmitter in a 2”-12” stand pipe. The stand pipe installation
dampens agitation, separates surface foam and reduces the
minimum required free space within the tank. |
|
|
|
|
| |
|
|
|
| |
| |
|
|
| |
EchoSwitch II Multi-Point Ultrasonic Level Switch
The general purpose ultrasonic switch
and controller provides non-contact level
detection up to 24.6’ (7.5 m) with 3 SPDT
60 VA 1A relays. EchoSwitch II features
digital push button configuration, eliminating
target calibration. Each relay can be
configured on a single set point to control
pumps, valves or alarms. In addition,
all 3 relays can be simplexed, duplexed or
triplexed. EchoSwitch II now features an
integrated timer with pump/valve delay
and timed pump alternation. The switch is
well suited for a broad range of corrosive,
waste and slurry type media. EchoSwitch
II is broadly selected for atmospheric day
tanks, pump lift stations and waste sump
applications.
|
|
|
|
|
| |
|
|
|
| |
| |
|
|
| |
Switch-Tek Vertical Buoyancy Level Switch
The general purpose buoyancy level switch is a perfect choice
for relatively clean water and chemical solutions with non-coating
and/or scaling characteristics. Media examples include
acetic acid and process water. The baffle body eliminates
switch chatter caused by turbulence. The dry contact closure
provides a reliable switch interface with remote devices such
as a PLC, SCADA or alarm. The sensor mounts vertically
inside the tank on our Smart-Trak or Switch-Pak fittings.
|
|
|
|
|
| |
|
|
|
| |
| |
|
|
| |
EchoSpan Ultrasonic Level Transmitter
The general purpose two-wire ultrasonic
transmitter provides non-contact level measurement up to 32’ or 10m, and is ideally suited for challenging ultrapure, corrosive or waste liquids. Push button calibrated, the transmitter is broadly selected for atmospheric bulk storage, day tank and waste sump applications. Media examples include wastewater and sodium hydroxide.
|
|
|
|
|
| |
|
|
|
| |
| |
|
|
| |
Switch-TekVibration Level Switch
The general purpose vibration level switch is a great choice for dirty
liquids including those with light to medium coating, scaling or foaming
characteristics. Media examples include wastewater, diluted caustic
soda and light weight oil. For optimum performance and proactive
maintenance, the sensor automatically adjusts for coating build up,
and if necessary, outputs a preventative maintenance alarm. The 1A
relay provides a reliable switch interface with remote devices such as a
PLC, SCADA or alarm. The submersible sensor is universally mounted
through the wall or inside the tank. |
|
|
|
|
| |
|
|
|
| |
| |
|
|
| |
EchoSafe®
Explosion-Proof Level Transmitter
The explosion proof, two-wire ultrasonic
transmitter provides non-contact level
measurement up to 10 m in hazardous
bulk storage, day tank, and sump applications,
and is well suited for challenging
corrosive, slurry or waste water Media.
Application examples include sodium
hypochlorite, waste water and resin. The
integral display and push button module
enable fast and simple calibration. |
|
|
|
|
| |
|
|
|
| |
| |
|
|
| |
Cable Float Level Switch
The Float Switches are made of molded,
chemical resistant polypropylene, that it was
serviceable, low-cost, and specially designed to
solve the long distance, multi-points level
detection, liquid with pump or granule instances.
Certainly, it's suitable for common liquid also. |
|
|
|
|
| |
|
|
|
| |
| |
|
|
| |
Minifloat Level Switch
Since technologies of the product have more and
more advance, the products need comply with a
requirement for more safe, convenient and low
cost. The float switches are extremely compact,
simple and are easy to install on any small space.
These switches are not effected by electrical interference. They can withstand to chemicals, high
temperatures and pressures if the correct material
of float switch is selected by the customers. |
|
|
|
|
| |
|
|
|
| |
| |
|
|
| |
Rotary Paddle Level Switch
The RP series operating principle is simple. A
unit is usually located through a bin wall at the
top, middle or low level of a bin. During
normal operation (no material present) a
synchronous motor rotates the paddle at 1
RPM. When this paddle rotation is impeded
by material, surroanding the paddle, motor will
stall and cause the Micro switch to change
state. (indicating an alarm or control) |
|
|
|
|
| |
|
|
|
| |
| |
|
|
| |
Cable Float Level Switch
The Float Level Switch are made of molded, chemical resistant polypropylene, that it
was serviceable, low-cost, and specially designed to solve the long distance, multipoints
level detection, liquid with pump or granule instances. Certainly, it's suitable
for common liquid also. FAC, FAP, FAR Type float switch make use of micro switch
as contact component. The switch will have ON or OFF contact signal output when
the angle is larger than 28°. FAS Type float switch make use of mercury switch as
contact component. When liquid lift up to contact float, the float will have variable
angles. The switch will have ON or OFF contact signal output when the angle is
10Deg. |
|
|
|
|
| |
|
|
|
| |
| |
|
|
| |
Radar Level
The Reflex VF Series range of TDR products is ideal for the measurement of liquids, powders and granules to a
range of 60m. Unaffected by pressure, temperature, viscosity, vacuum, foam, dust, changes in dielectric constant or
coating of the probe, the VF Series can measure virtually any product in either Direct or TBF mode utilising any one
of its seven probe types. |
|
|
|
|
| |
|
|
|
| |
| |
|
|
| |
Side Mounted Level
Side mounted heavy duty tank level indicator are suitable for storage tanks, Batch tank, Day
tank, Receiver tank. It is simple & reliable devices for direct reading in Atmospheric or
pressurised tank application. |
|
|
|
|
| |
|
|
|
| |
| |
|
|
| |
Minifloat Level Switch
When the magnetic field of permanent magnet inside the float is moved into to the
proximity of the reed switch inside the stationary stem, the reed switch "snaps" the
contact together and closes the electrical circuit. When the magnetic field is moved
away from the reed switch, the reed switch does not touch. The circuit is open. |
|
|
|
|
| |
|
|
|
| |
| |
|
|
| |
Reflex Level Indicator
It is designed for most critical requirements of liquid level
in vessels under high pressure & temperature condition in
petrochemicals, fertilizer and pharmaceuticals & chemical
industries involving inflammable toxic liquid, high temp
Liquids. |
|
|
|
|
| |
|
|
|
| |
| |
|
|
| |
Thermal Level Alarm
The SL-100 series utilizes the thermal dispersion
principle of the dissipation of heat by liquid to detect
the presence or absence of liquid as compared with
air. A typical configuration uses two Temperature
Detectors set within the tip of the sensor. One
Temperature Detector is heated a few degrees above
the other one. As the level of process liquid drop
below the tip, the delta temperature rises and the
output will change state. |
|
|
|
|
| |
|
|
|
| |
|
|
|
|
|
